Camon C500 Operations Instructions

C500 STUMP GRINDEROperating InstructionsBefore commissioning the machine, read operating instructions and observe warning and safety instructions.

CAMON-C500/11.11/8 CAMON-C500/11.11/9CAMON C500 Stump GrinderCAMON C500 Stump GrinderWARNING!Procedure for Cutting a StumpNever leave controls when cu

CAMON-C500/11.11/8 CAMON-C500/11.11/9CAMON C500 Stump GrinderCAMON C500 Stump GrinderWARNING!Procedure for Cutting a StumpNever leave controls when cu

Machine Stopping1. When stopping the machine after normal operation, lower engine speed to “SLOW”, and release operator presence control.A

Machine Stopping1. When stopping the machine after normal operation, lower engine speed to “SLOW”, and release operator presence control.A

CAMON-C500/11.11/12 CAMON-C500/11.11/13CAMON C500 Stump GrinderCAMON C500 Stump GrinderSAFETYSAFETYBefore Starting the Engine1. Review all of the safe

CAMON-C500/11.11/12 CAMON-C500/11.11/13CAMON C500 Stump GrinderCAMON C500 Stump GrinderSAFETYSAFETYBefore Starting the Engine1. Review all of the safe

CAMON-C500/11.11/14 CAMON-C500/11.11/15CAMON C500 Stump GrinderCAMON C500 Stump GrinderMAINTENANCEMAINTENANCEFor coarse adjustment, loosen lock nuts

CAMON-C500/11.11/14 CAMON-C500/11.11/15CAMON C500 Stump GrinderCAMON C500 Stump GrinderMAINTENANCEMAINTENANCEFor coarse adjustment, loosen lock nuts

MAINTENANCEMAINTENANCECAMON-C500/11.11/16 CAMON-C500/11.11/17CAMON C500 Stump GrinderCAMON C500 Stump GrinderSharpening of TeethDo not allow any tooth

MAINTENANCEMAINTENANCECAMON-C500/11.11/16 CAMON-C500/11.11/17CAMON C500 Stump GrinderCAMON C500 Stump GrinderSharpening of TeethDo not allow any tooth

No liability will be accepted for any damage caused to persons or propertythrough failure to observe the operating and safety instructions.CAMON-C500/

V-Belt TensionCheckDrive belts are properly tensioned when 5kg of pressure at the centre of the span produces 4mm deflection.To adjust tension, loosen

V-Belt TensionCheckDrive belts are properly tensioned when 5kg of pressure at the centre of the span produces 4mm deflection.To adjust tension, loosen

OPERATION 10 Hrs or Each Use 1st Month or 20 Hrs 1st 50 Hrs Every 3 Months or 50 Hrs 1st 100 Hrs Every 6 Months or 100 Hrs Every Year or 300 Hrs Chec

OPERATION 10 Hrs or Each Use 1st Month or 20 Hrs 1st 50 Hrs Every 3 Months or 50 Hrs 1st 100 Hrs Every 6 Months or 100 Hrs Every Year or 300 Hrs Chec

Tracmaster Ltd, Sovereign Centre, Victoria Road, Burgess Hill RH15 9LRT: +44 (0) 1444 247689 F: +44 (0) 1444 871612W: www.tracmaster.co.uk E:

No liability will be accepted for any damage caused to persons or propertythrough failure to observe the operating and safety instructions.CAMON-C500/

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/2 CAMON-C500/11.11/31. Remove the machine from its crate.2. Remove the handlebar sec

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/2 CAMON-C500/11.11/31. Remove the machine from its crate.2. Remove the handlebar sec

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/4 CAMON-C500/11.11/5Handbrake Assembly1. Loosen pivot fastener that holds the brake l

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/4 CAMON-C500/11.11/5Handbrake Assembly1. Loosen pivot fastener that holds the brake l

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/6WARNING!Transporting the MachineThe C500 is designed to be transported via a van or

CAMON C500 Stump GrinderCAMON C500 Stump GrinderCAMON-C500/11.11/6WARNING!Transporting the MachineThe C500 is designed to be transported via a van or